Docomo FOMA D702iF, Руководства

Страница: 39 / 451

37
Bef
o
re Using
D702
iF
●
When attaching the battery pack, make sure that the UIM slot tray is in place. If not, you cannot attach the battery pack.
Forcibly attaching the battery pack may damage the UIM or the UIM slot tray.
●
When pushing the UIM slot tray in, make sure that the UIM is properly placed in the slot tray and the slot cover. Forcibly
pushing the slot tray into FOMA terminal may cause an operation error.
UIM security codes
The PIN1 and PIN2 codes are used for the UIM.
Both codes are set to “0000” at the time of subscription to the FOMA service. You can change this to any code
(4 to 8 digits).
☛
P144
UIM operation restriction function
FOMA terminal is provided with the UIM operation restriction function for protecting your data and files.
･
When the data or files downloaded from sites or the data attached to mail are saved in FOMA terminal with
the UIM inserted, the UIM operation restriction is automatically set to these data or files.
･
If the UIM is replaced by another UIM or is removed from FOMA terminal, the data or files with the UIM
operation restriction set cannot be displayed or played.
･
The data or files with the UIM operation restriction set cannot be sent by infrared communication.
･
The data which is subject to the restriction is as follows:
･
For i-
α
ppli with the UIM operation restriction set, the following operations are disabled when the UIM is
replaced by another UIM or is removed from FOMA terminal:
INFORMATION
● When the data with the UIM operation restriction enabled is set for the standby display, call image or ring alert, the
image and sound settings return to the default if the UIM is replaced by another UIM or is removed from FOMA terminal.
In this case, the image and sound that are actually displayed/generated may differ from the settings. Inserting the UIM
that was used when the data was downloaded cancels the operation restriction of the data and restores the original
settings. (Note that the setting may be canceled if the data was used for Random Display Image.)
●
The UIM operation restriction is not set to the data obtained via infrared communication or data link software, or to the
still images or videos taken with the built-in camera. The UIM operation restriction may not be set to some mail
templates such as the one containing only text.
● When the UIM is inserted in other i-channel compatible terminals, the i-channel information is not displayed as ticker on
the standby display. After that, if the information is updated automatically or if you press
c
on the standby display to
display the channel list, the latest information is received and then displayed as ticker on the standby display.
●
When the UIM is not inserted, the i-channel information is not displayed as ticker on the standby display.
・
Screen memo
・
Message R/F
・
Image inserted in Deco-mail or signature
・
File attached to i-mode Mail
・
i-
α
ppli (including the i-
α
ppli standby display)
・
i-motion
・
Image (including animation and Flash movie)
・
Chara-den
・
Melody
・
Recorded message for videophone call
・
Video memo
・
Start
・
Displaying the detail information of i-
α
ppli
・
Operation settings for i-
α
ppli
・
Auto Start
・
Changing the setting of Auto Start
・
Setting the i-
α
ppli standby display
・
Upgrade
Settings saved into the UIM
The following settings are saved into the UIM. If the UIM is replaced, the settings saved in the new UIM
become available.
･
Font type, storage period in the SMS Center, SMSC, address, type of number set in SMS Setting
･
DoCoMo certificate and user certificate set in Certificate Setting
･
My phone number
･
Select Language
･
The PIN1/PIN2 code of the UIM and PIN1 Code ON/OFF
Usi
n
g
the UIM (FOMA card)