Docomo FOMA D702iF, Руководства

Страница: 155 / 451

153
S
a
fety
S
e
tti
ngs
Restricting outgoing/incoming or sending/receiving actions
Displaying the data with Secret Attribute set
Secret Mode
If Secret Mode is set, the phonebook data/the schedule data with Secret Attribute set can be displayed.
When you set/cancel Secret Attribute, you need to set Secret Mode on.
1
m832
2
Enter the terminal security code
Secret Mode is set and is indicated on the upper part of the display.
■ Canceling:
f
on the standby display
･
Also, press
m832
on the standby display to cancel it.
INFORMATION
●
If an animation, Created animation or Flash movie is set on the standby display while Secret Mode is on, the first frame
is displayed. If you press
f
, Secret Mode is canceled and the animation, Created animation or Flash movie is played.
●
When a call/mail is received from the other party with Secret Attribute set while Secret Mode is on, the ring alert, the
incoming vibrator and the incoming lighting set in the phonebook data are used. While not in Secret Mode, each setting
in Sound Setting, Vibrator Setting and Light Alert Setting is applied.
Rejecting/accepting incoming calls from the specified phone numbers
Reject/Accept Call
Reject/Accept Call is set for each phone number registered in the FOMA terminal phonebook.
･
To use this function, set Reject/Accept Call for each phone number and then enable Reject/Accept Call in
this setting. The items to be set and operations of rejecting/accepting incoming calls are as follows:
*1 Even if a call is received from the set phone number, the call is disconnected without the ring alert sounding and
the other party hears busy signals.
･
This function is activated only when the other party notifies the caller ID.
･
The rejected calls are recorded as missed calls in the received call history.
･
If the ringing time is set to 0 second for Voice Mail Service or Call Forwarding Service, Voice Mail Service or
Call Forwarding Service is activated and the call is not recorded in the received call history.
･
Combination with Caller ID Request Service and Anonymous Caller is recommended when used.
Specifying phone numbers to reject/accept
Reject/Accept Call is set for the phone numbers registered in the FOMA terminal phonebook.
･
Reject/Accept Call cannot be set for the phone numbers registered in the UIM phonebook.
1
Search the phonebook
z
Highlight a party
z m343
2
Enter the terminal security code
z
Select a phone number
Default not set
Reject/Accept
Call
Reject/Accept Call setting for each phone number
Accept call Reject call No setting
Cancel settings Accept Accept Accept
Reject call
Accept Reject*
1
Accept
Accept call Accept Reject*
1
Reject*
1
S
ecr
et Mode
Next