Docomo FOMA D702iF, Руководства

Страница: 122 / 451

120
Sounds/Di
s
plays
/L
ig
hts
Settings
Setting the operation of vibrator for incoming calls
1
m8131
■ Setting the operation for incoming mails/messages:
m8132
■ Setting the operation while an alarm is sounding:
m8133
■ Setting the operation while using i-
α
ppli:
m8134 z
Go to Step 3
2
1
or
2
･
To set the operation for incoming mails/messages:
1
to
4
However, if
Alert setting
is set to
Same: Mail setting
in Chat Mail Alert,
Chat M vibrate alert
cannot be set.
･
To set the operation while an alarm is sounding:
1
or
2
3
Press any of
1
to
5
･
To set the operation while using i-
α
ppli:
1
or
2
･
If you set to
Pattern A
, the terminal vibrates as follows: about 0.7 second vibration → about 0.7 second
pause → about 0.7 second vibration → about 1.5 second pause (repeated)
･
If you set to Pattern B , the terminal vibrates as follows: about 1 second vibration
→
about 2 second pause
(repeated)
･
If you set to Pattern C , the terminal vibrates as follows: about 0.7 second vibration
→
about 0.7 second
pause (repeated)
･
If you set to
Sync melody
, the terminal vibrates along with the melody set as ring alert, alarm clock sound
or schedule reminder. Note that it may not vibrate depending on melodies. In addition, vibration may not
synchronize with the theme.
･
If
OFF
is set, the terminal does not vibrate.
･
The vibrator operates by the highlighted pattern except when
Sync melody
or
OFF
is highlighted.
･
When
Call vibrate alert
is set, (when the call alert volume is set to
SILENT
, ) is indicated on the
standby display.
■ Priority of vibrator
When the vibrator is set in multiple functions, the vibrator operates by priorities given below:
a
Alert by Contact of the FOMA terminal phonebook
b
Alert/Image by Group of the FOMA terminal phonebook
c
Vibrator Setting
INFORMATION
● The vibrator does not operate when a call is received during another call.
●
Even when OFF is set, the vibrator may be activated while some Flash movies are being played.
Setting the alert sound for charging
Charge Alert
Set whether to sound the alert sound for the start and completion of charging.
1
m8115 z
Press
1
or
2
INFORMATION
●
Even when ON is set, the charge alert sound is not played in the following cases:
･
In Silent Mode
･
In Public mode (Driving mode)
･
During a voice call
･
During a videophone call
･
During 64K data communication
･
During i-mode communication
･
During packet communication
Default ON
Example
Charge Alert