Setting Access Point
Access points for Internet connection (sp-mode and mopera
U) are added by default. You can add and modify access
points as necessary.
• By default, sp-mode is selected as default access point.
However, the settings may differ depending on the terms set
forth in your contract.
Checking Access Point in Use
Home screen
W
W
[Settings]
W
[More...]
[Mobile networks]
W
[Access Point Names]
Setting Additional Access Point
• Do not change MCC to other than 440, or MNC other than 10.
If you change MCC/MNC, the access point will no longer be
displayed on the screen.
Home screen
W
W
[Settings]
W
[More...]
[Mobile networks]
W
[Access Point Names]
W
W
[New APN]
[Name]
W
Enter the name of network profile to
create
W
[OK]
[APN]
W
Enter an access point name
W
[OK]
Enter other items required by the network
operator
W
W
[Save]
• If MCC or MNC has been changed and the access
point is not displayed on the screen, reset access
point settings to the default status, or manually
configure the access point.
104
Initial Setting
