84
Data Communication
To register/connect a Bluetooth device, the Bluetooth passkey
may need to be entered. Before starting the registration, decide
one- to sixteen-digit number. Enter the same number on the
handset and the other party's Bluetooth device.
Set the other party's Bluetooth device to the registration stand-by
status in advance.
1
In the home screen, display the Apps Sheet
/
[Settings]
/
[Bluetooth]
2
Set to On
3
Select a Bluetooth device
/
[PAIR]
:
The confirmation screen for connection may be displayed.
:
Entering the Bluetooth passkey may be necessary
depending on the other party's Bluetooth device. Also, some
Bluetooth devices may start connection after completing
registration.
:
To search for Bluetooth devices: [
]
/
[Refresh]
:
Touch [
] of a paired Bluetooth device to set name and
intended purpose of the other party's Bluetooth device.
■
When receiving registration request from Bluetooth
device or connection request from unregistered
Bluetooth device
1
Registration request/Connection request from
Bluetooth device
2
Drag the status bar down
/
[Pairing request]
/
[PAIR]
:
When the confirmation screen about the settings on pairing
appears, select [PAIR].
:
Entering the Bluetooth passkey may be necessary
depending on the other party's Bluetooth device.
:
The confirmation screen for connection may be displayed.
■
Unregistering Bluetooth device
1
In the Bluetooth screen, [
] of the Bluetooth
device to unregister
/
[FORGET]
■
Disconnecting Bluetooth device
1
In the Bluetooth screen, select the Bluetooth
device to disconnect
/
[OK]
■
Setting Bluetooth
Set after setting [Bluetooth] to On.
1
In the Bluetooth screen, [
]
2
Select an item
Refresh
: Search for the Bluetooth device.
Rename this device
: Change the handset's name.
Qualcomm
®
aptX
™
: Set whether to use Qualcomm aptX
audio.
Show received files
: Display the history of data received via
Bluetooth connection.
■
Sending data
Example: Still picture
1
In the home screen, display the Apps Sheet
/
select “Tool” folder
/
[Contents Manager]
/
[Photo]
2
Touch and hold a still picture
/
[Share]
/
[Bluetooth]
:
Set the receiver's Bluetooth device to the reception stand-by
status.
3
Select a Bluetooth device to connect to
■
Receiving data
1
Data is sent from the sender's Bluetooth device
2
Drag the status bar down
/
select the incoming
notification
/
[ACCEPT]
3
Drag the status bar down
/
select the received
data
Using Bluetooth function
You can connect up to seven Bluetooth devices at the same
time. Bluetooth devices may not work properly or the number of
Bluetooth devices which can be connected at the same time
may differ depending on the profile.
If you fail to connect a Bluetooth device, connection may
become available after re-registering it.
When [Bluetooth] is set to On, the handset is set to receive
registration requests/connection requests from other Bluetooth
devices. Display the Bluetooth screen when other Bluetooth
devices search the handset.
While in connection stand-by, even if a connection request from
a Bluetooth device is received, connection may not be made
depending on the signal status etc.
For details on the operations of the other party's Bluetooth
device, refer to the manuals of the Bluetooth device to be used.
[Qualcomm
®
aptX
™
]
When you enable [aptX], sounds may not be output depending
on the Bluetooth device. In this case, disable [aptX].
Sending and receiving by Bluetooth
Receiving all data may not be available depending on the data
type.
When available space in the save destination becomes
insufficient while receiving data, the data being received to that
point are saved and receiving ends.
D２-01J_E.book 84 ページ
７年
月
日 木曜日 午後
時９分
Содержание DM-01J
Страница 1: ...17 1 INSTRUCTION MANUAL...
