77
Handset Settings
The surface condition of your finger is extremely different from
when you have registered your fingerprint
Touch with your finger on the whole fingerprint sensor. Not to
touch with floating when the handset is equipped with the Disney
original cover.
Personal authentication and identification are not completely
guaranteed by fingerprint authentication technology. Note that
DOCOMO shall not be liable for any damage incurred due to a
misuse by a third party and what you have not been able to use
the handset.
■
Cautions when using fingerprint sensor
Do not let the handset hit or subject to strong impacts. May
cause a malfunction or damage. Do not scratch the surface of
the sensor or poke it with a pointed object such as a ballpoint pen
or pin.
Do not put a sticker etc. on the surface of the fingerprint sensor
or daub it with ink etc.
If dust such as dirt or fat etc. adheres to the sensor, reading of a
fingerprint may be difficult or authentication performance may
degrade. Occasionally clean the surface of the fingerprint sensor.
Your fingerprint cannot be authenticated properly if it is too fast to
release your finger. Release the finger after the fingerprint is
authenticated.
If you start registration or authentication of your fingerprint while
touching the fingerprint sensor with your finger, you may not be
able to activate the function. Release your finger and try again.
■
Registration of fingerprint
You can register your fingerprint used for fingerprint authentication.
Also, when a shortcut which is carried out to activate an app etc. is
set to fingerprint, unlock the touch panel by fingerprint
authentication to use the shortcut.
You can set the shortcut by fingerprint.
You can register up to five fingerprints.
If fingerprint sensor fails to read your fingerprint, you may be able
to improve the authentication performance by using another
finger.
Set Screen lock to an item other than [None] or [Swipe or Touch]
in advance (
>
Remove the Disney original cover when registering fingerprints.
1
In the home screen, display the Apps Sheet
/
[Settings]
/
[Lock & Security]
/
[Fingerprint
settings]
:
Unlock the screen by method set in Screen lock.
2
[Add new item]
:
To change a registered name: Touch the registered
fingerprint
/
[Rename]
/
enter the name
/
[OK]
:
To delete a registered fingerprint: Touch the registered
fingerprint
/
[Delete fingerprint]
/
[OK]
3
Touch the fingerprint sensor with your finger
ball
:
For registering the wide range of the fingerprint, touch it
repeatedly while shifting the touching position gradually until
the percentage indicator becomes 100%.
:
Register your fingerprint to unlock Screen lock and the
security key by fingerprint authentication as well. Touch [OK]
in the confirmation screen.
･
If fingerprint authentication is not available, unlock the
screen by method set in Screen lock or the security key.
4
[Continue to register shortcut next]/[Not now]
:
If you select [Continue to register shortcut next], a shortcut
activated by the registered fingerprint can be set.
5
[DONE]
:
If the setting screen of the security key used when fingerprint
authentication is unavailable is displayed, operate by
following the instructions on the screen.
Changing a shortcut
1
In the Fingerprint settings screen, select a
registered fingerprint
/
[Edit shortcut]
:
To delete a shortcut: [Delete shortcut]
2
Select a shortcut to set
3
[DONE]
■
Using fingerprint authentication function
1
While the display is turned off/In the lock
screen of the touch panel/In the fingerprint
authentication screen, touch the fingerprint
sensor with your finger ball
:
When you operate it while the display is turned off, the touch
panel is unlocked and the display is turned on.
:
If your fingerprint cannot be authenticated properly, release it
from the fingerprint sensor and try again.
You can make settings for the PIN code.
1
In the home screen, display the Apps Sheet
/
[Settings]
/
[Lock & Security]
/
[Set up SIM card
lock]
2
Select an item
Lock SIM card
: Set whether to enter the PIN code when the
power is turned on.
Change SIM PIN
: Change the PIN code.
1
In the PIN locking screen, enter PUK (PIN
Unlock Key)
2
Enter a new PIN code
3
Enter the new PIN code again
Note that if Screen lock is set to [None] or [Swipe or Touch],
registered fingerprints are deleted.
Setting up SIM card lock
In Japan, you cannot make a call to the emergency number
(110, 119 or 118) when a docomo nano UIM card is not
inserted, while the PIN code is locked or from the PUK (PIN
Unlock Key) entry screen.
The setting is saved on the docomo nano UIM card.
Disabling PIN lock
D２-01J_E.book 77 ページ
７年
月
日 木曜日 午後
時９分
Содержание DM-01J
Страница 1: ...17 1 INSTRUCTION MANUAL...
