doble TDR9000 Скачать руководство пользователя страница 184

Страница: 184 / 454

Working with Test Results

4-86

72A-1898 Rev. A 11/01

Monday

, November 26, 2001 1:09 pm

Time

(Milliseconds

or Cycles)

Time can be displayed in msec or cycles, regardless of the units selected
in the original Test Plan.

To change the time format:

• Click the

mSec/Cycles

button for the Graphics tab.

• Select the units under

Tools/TRX Options

before displaying the

Test Results. All subsequent windows appear with the selected
units.

Adjusting
Displayed Test
Results

Test Results can be zoomed vertically and horizontally, overlaid and
re-ordered.

Zoom

To select and enlarge a portion of the channels:

Display the channels.

Ensure that the cursors are turned off.

If they are on, click the

Cursor Delete

button.

Click the upper left corner of the channel area to be enlarged and
hold the left mouse button.

Drag the mouse down to the bottom right corner of the channel area
to be enlarged, and release the mouse button.

The area selected can include one or more channels.

•

Zoom

repeatedly to continue adjusting the displayed area.

• To

Unzoom

, click the

Unzoom

icon in the upper right area of the

channel viewing area.

Channels return to their original display form.

• To re-order the channels so that they can be zoomed together, or

to overlay the channels before zooming, see the sections
”Overlay” on page 4-87 and ”Re-order Displayed Channels”
on page 4-89.

Содержание TDR9000







































































































































































































































































































































































































































































Результаты поиска

Содержание TDR9000

Отзывы:

doble TDR9000, Руководство пользователя, Страница: 184 / 454

Результаты поиска

Содержание TDR9000

Отзывы: