DNP Imagingcomm America Corporation
61
Printing from Android Devices using the WPS Print 3 App
WPS Pro User Guide
Printing from Android Devices using the WPS Print 3 App
The WPS Print 2 app allows you to print existing images from your device’s photo gallery or photo album to the WPS Pro
device.
Note
When using this app, the images you take are saved in an album in your photo gallery or camera
roll. If you have the image archiving functionality turned ON, and an micro SD card plugged into
the WPS Pro device, your images are also saved to a micro SD card.
1.
Connect your mobile device to the Wi-Fi signal created by WPS Pro.
Note
IMPORTANT
The WPS Pro Wi-Fi login credentials have changed for version 3:
SSID:
WPS3__xx
Password:
DNP2WPS3
(All CAPS)
The WiFi SSID is
WPS3_xx
, where
xx
is the
unique ID
for your WPS Pro®.
2.
When prompted, enter the password:
DNP2WPS3
. (ALL CAPS)
3.
Wait until your device shows as connected to the WPS Pro Wi-Fi network. This can take up to two minutes.
4.
On your mobile device, open the
WPS Print 3
app.
5.
The WPS Print 3 application is now ready to use.
