DNP DS-SL20, Руководство по эксплуатации

Страница: 70 / 81

70
Printing From a Computer
Cha
p
te
r 6
O
per
at
ion
Adjusting the Image Quality for the
Expansion Printer
You can adjust the image quality for the expansion printer
from the unit. For details, see
“Setting the Image Quality
for an Expansion Printer” on page 53 .
Printing From a Computer
When the supplied USB cable is used to connect the unit
to a computer, data sent from the computer can be printed
out using this unit.
When the USB cable is plugged in, the indication “PC
MODE” is shown on the display of the unit. In this
condition, the touch panel is inactive.
Installing the Printer Driver
If the unit is to be controlled from a computer, you must
install the supplied printer driver on the computer before
connecting the unit to the computer for the first time.
For details on installation, refer to the installation guide
and the Readme file on the supplied CD-ROM.
The supplied printer driver does not support printing via a
network.
Computer Connection Setting
You can select whether to receive commands from a
computer.
To enable commands from a computer, touch the [ON]
button for [PC Connection] in the System tab of the
administration screen.
When [OFF] is selected, commands from computers
connected to the unit via USB cable will be ignored.
Note