DNP DS-SL20, Руководство по эксплуатации

Страница: 23 / 81

23
Loading the Paper Roll and Ink Ribbon
Cha
p
te
r 2
P
repa
ra
ti
ons
Attaching the Output Cover
Attach the output cover to the output tray. Doing so
prevents minor cuts and injuries that may result from
printouts ejecting quickly out of the output slot while
printing.
To attach the output cover
Checking the Remaining Ink Ribbon
You can check the amount of ink ribbon that remains from
the Start Guide screen.
1
Display the Start Guide screen.
2
Touch the top right corner of the Start Guide screen
twice in succession.
The confirmation screen for the remaining ink ribbon
appears.
Print Size
Displays the size selected for prints.
Ribbon Remain
Displays the remaining number of prints for the ink ribbon.
When the remaining number of prints reaches 0, replace
the ink ribbon and paper roll.
For details, see
“Loading the Paper Roll and Ink Ribbon”
on page 16 .
button
Displays the number of prints since the last head cleaning.
If the “Cleaning is necessary” message appears to the right
of the number of prints, touch the button to perform
cleaning.
Information on additional printers
If another printer is connected to this unit, Print Size and
Ribbon Remain information for the additional printer
appears here.