- 14 -
Use the opening lever to open the lock, and
then pull out the mechanism unit�
Lift the paper lever and raise the front cover�
Hold the center of the scrap box and lift it
up straight�
Printer Installation
Caution
• Do not apply too much strength when pulling the mechanism unit out� If detached, the
mechanism unit may fall and cause an injury or damage to surrounding objects�
• Never remove the scrap box diagonally� The scrap box may be damaged and the product
may not operate normally�
• When the scrap box has been removed, do not touch the cutter on the upper part or you
may be cut�
• In order to facilitate color adjustment, media type recognition, and print quantity
management, an IC chip is included in the ink ribbon� Note that a ribbon with an IC chip that
has not been evaluated and approved may not function properly� (If correct data cannot be
read from the IC chip, an alarm will sound� In such a case, ink concentration levels will be
lowered in order to protect the product�)
Setting the media (paper, ribbon)
Opening lever
Front cover
Scrap box
Paper Lever
2
1
3