ArtNet Player 4
7
Universe Settings
For each universe the target-settings must be specified within the tabs Universe 1 up
to Universe 4.
The option Enable ArtNet-Output must be activated for an ArtNet-Output.
The Destination-IP shows the target-devices IP to which the universe should be
send.
By activated Use Broadcast the universe will be send global to all devices, in this
case the Destination-IP will not be needed.
Furthermore for each universe the ArtNet-parameters Net, SubNet and Universe will
be specified for the target.
The option ArtNet to DMX OUT with BACKUP is available for Universe 1. If it is
activated, for this Universe no ArtNet-Data can be sent. In this case the ArtNet-
Parameter Net, SubNet and Universe are used for receiving ArtNet-Data.
In the case of receiving ArtNet-Data, these are outputted priority. If no ArtNet-Data
are received for longer than 5 seconds, then the DMX-Output is switched to program
playback.