Installation and User Manual
2.3 - Installing ProFusion D
Follow the instructions below to install and test ProFusion D.
All related audio equipment MUST be turned off
before proceeding.
Step 1
Plug one end of a mono RCA cable into the Zone 1 RCA jack on the rear
panel of ProFusion D and the other end of the mono RCA cable into the
corresponding monaural input (such as “CD” or “Aux”) on the amplification
equipment.
Do not use the “Phono” input jacks on the
amplification equipment. Utilizing the “Phono”
inputs may result in distorted audio quality.
Step 2
If your service includes the Messaging On Hold feature, please connect the
MOH equipment to the
Zone 2
RCA output.
Step 3
Connect ProFusion D to a properly grounded power source. In some
locations, it may be necessary to switch power to the outlet on.
Page 8 of 14