Installation and User Manual
2. Installing ProFusion D
Before Beginning
Before beginning installation, please turn off the audio equipment that will be connected
to ProFusion D. Please read the safety warnings on the first page of this manual and
read Section 2.2,
Connection Guidelines
.
The ProFusion D carton should contain the following items:
1 ProFusion D Player
1 power cable
1 RCA cable
1 operator’s manual
1 Opening Disc Library (number of ProFusion D discs varies by service)
If any of these items are not included, please contact Customer Support (see Appendix
B.)
2.1 - Necessary Equipment
•
One RCA cable for music and (if required) one RCA cable for Messaging On Hold.
•
Audio playback equipment with available mono input jacks such as “CD” or “Aux”
2.2 – Connection Guidelines
It is important for users to follow these guidelines
when making any ProFusion D system connection.
Failure to do so may result in undesirable performance.
•
Do not plug ProFusion D into an AC outlet until all connections have been made
and you have completely read Section 2,
Installing ProFusion D
.
•
Turn the audio system amplifier off and the volume completely down before
installing ProFusion D.
•
ProFusion D should
NOT
be plugged into the AC socket found on the rear of some
audio amplifiers because of potential grounding irregularities. Plug only into a
properly grounded wall socket.
•
Once ProFusion D is turned on, it should remain plugged into an unswitched AC
outlet so that it is not inadvertently powered down incorrectly when power to the
outlet is turned off.
•
If it is necessary to unplug ProFusion D, you
MUST
first turn it off by pressing the
Standby button once.
Page 7 of 14
