DMT LS-190, Руководство пользователя

Страница: 56 / 76

55
Ordercode: 101600
LS-190 LED Screen Processor
How to Set up the PIP
01) Press the SAVE/PIP1 button or the LOAD/PIP2 button twice. The display will show:
02) Turn the menu control (02) to select LAYOUT and press the menu control (02) to enter. Turn the menu
control (02) to choose one of the following 3 PIP layouts:
03) Press the menu control (02) to confirm your choice.
04) Turn the menu control (02) to select SWAP IMAGE and press the menu control (02) to enter.
05) Turn the menu control (02) to select ON/OFF. If set to ON, the device will switch between IMAGE A
and IMAGE B. Press the menu control (02) to confirm your choice.
06) Turn the menu control (02) to select ALPHA. Press the menu control (02) to enter.
07) Turn the menu control (02) to set the image transparency. The adjustment range is between 0-16.
Press the menu control (02) to confirm.
08) Turn the menu control (02) to select SELECT and press the menu control (02) to enter.
09) Turn the menu control (02) to select IMAGE A or B (alternatively, press the IMAGE1/IMAGE2 button.)
How to Set up the Size and Position of the Single Image
01) Press the SCALE/CROP button to enter the menu. The display will show:
02) Press the menu control (02) to enter edit mode.
03) Press the 0-9 buttons (04) to set the values. Alternatively, turn the menu control (02).
04) You can adjust the following settings:
•
H SIZE: Width setting
•
V SIZE: Height setting
• H POS: Horizontal phase setting
•
V POS: Vertical phase setting
•
RESET: If the image quality deteriorates because of improper operation, you can reset it with this
function.
PIP L+T PBP L+R PBP T+B