DMT 100263, Руководство пользователя

Страница: 8 / 16

7
Ordercode: 100263
PLB-2342FM
Solid Brick and Concrete Block Mounting

Use a 10 mm drill bit (concrete) to drill the holes (hole size: 10 mm, hole depth: 60 mm).
 When installing the wall mounts on a cinderblock, verify that you have a minimum of 1-3/8” of actual
concrete thickness in the hole to be used for the concrete anchors.
 Do not drill into mortar joints!
 Be sure to mount on a solid part of the block, with a 1” minimum from the side of the block. You should use
an electric drill at low speed to drill the hole, instead of a hammer drill to avoid breaking out the back of
the hole when entering a void or cavity.
 The installer must verify if the supporting surface will safely support the combined load of the equipment
and all attached hardware and components.
 Use the wall bracket as a template to mark the holes on the wall.