DMT 100263, Руководство пользователя

Страница: 6 / 16

5
Ordercode: 100263
PLB-2342FM
Description of the device
Features
The PLB-2342FM is a bracket for flat screen TVs.
 Fixed wall mount
 Maximum Load: 20 kg
 Screen size: 23" - 42"
 Tilt adjustment: from -20° to +20°
 Lateral rotation: from -90° to +90°
 Max. VESA: 75 x 75 to 200 x 200 mm
 Weight: 2,1 kg
Overview
Fig. 01
Installation
Remove all packing materials from the PLB-2342FM. Check that all foam and plastic padding is removed.
Connect all cables.
Do not supply power before the whole system is set up and connected properly.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Set Up and Operation
Follow the directions below, as they pertain to your preferred operation mode.
Wood Stud Wall Mounting
 Use a 4,5 mm drill bit (wood) to drill the holes (hole size: 4,5 mm, hole depth: 55 mm).
 Make sure that the supporting surface will safely support the combined load of the equipment and all
attached hardware and components.
 Firmly tighten the woodscrews, but do not overtighten. Overtightening can damage the bracket, thereby
greatly reducing its holding power.
 When mounting the bracket to wood wall studs, make sure that the mounting screws are anchored into
the center of the studs. Use of an “edge to edge” stud finder is highly recommended.