V-4030PT-1 INDOOR PAN/TILT
VIDEO CAMERA
Installation Guide
DESCRIPTION
Figure 1: Pan/Tilt
HD Video Camera
Using a DMP Wireless Access Point (WAP)
Wireless Connection
1. Plug the 5V power supply into the port on the
back of the camera, then connect it to a power
outlet.
2. Press and hold the WPS button on the back of
the WAP for 2 seconds.
3. Press and hold the WPS button on the side of the
camera for three seconds. Once the camera and
WAP are connected, the LED on the WAP turns
on steady.
Auto Pair
1. Verify the WAP is powered.
2. Plug the 5V power supply into the port on the
back of the camera, then connect it to a power
outlet. Auto-pairing begins immediately. Once
the camera and WAP are connected, the LED on
the WAP turns on steady.
1
The DMP V-4030PT-1 is an indoor
video camera that allows for
viewing live and recorded video
clips using the Virtual Keypad
TM
App
and VirtualKeypad.com. The camera
can be connected using Wi-Fi or a
wired connection.
The camera can be set up to
automatically record when armed,
when motion is detected, or when
the system is in alarm, giving
immediate notification to the user.
Compatibility
All DMP systems. Users should have
the Virtual Keypad App or should be
using VirtualKeypad.com.
What is Included?
•
V-4030PT-1 Camera
•
Camera Mounting Base
•
Hardware Pack and Mounting
Template
•
5V Power Supply
•
V-IP1006RR WAP (Optional)
MOUNT THE CAMERA
1. Use the included template to mark the screw holes for
the camera mounting base.
2. Secure the camera mounting base onto the surface
using the supplied screws.
3. Route any power and network cables through the
mounting base and connected them as necessary.
4. Secure the camera to the mounting base. See Figure 2.
POWER AND CONNECT THE CAMERA
2
Pan
Tilt
Figure 2: Mount the Camera
Open
Lock
Mounting
Base
