DMP Electronics Thinline 7463, Инструкция по установке и программированию

Страница: 24 / 40

20 7400 Series Thinline™ Keypad Installation and Programming Guide | Digital Monitoring Products, Inc.
Require Site Code
Press the top row select key or area under YES to use a site
code and press
CMD
to view the site code entry display. Press
NO to advance to NO OF USER CODE DIGITS . Default is NO .
In addition to user code verification, door access is only
granted when any one site code programmed at the
SITE CODE ENTRY
option matches the site code received in
the Wiegand string.
Number of User Code Digits
The keypad recognizes user codes from 4-12 digits long.
Press any top row select key or area to enter a user code digit
length. This number must match the user code number length
being programmed in the panel. The device will recommend
a number of user code digits based on the user code length.
Default is
5
.
All bits are read and converted into a decimal number string.
The number string is left padded with 0 (zero) if needed for
long user code lengths.
Example: # decoded 1234567
10 digits 0001234567
4 digits 4567
REQUIRE SITE
CODE:
NO
YES
NO OF USER CODE
DIGITS:
5