DMP Electronics ITI 738I, Инструкция по установке и программированию

Страница: 16 / 24

12 738I ITI™ Installation and Programming Guide | Digital Monitoring Products, Inc.
Transmitter Type
Enter a transmitter type by pressing the Select keys below
the type of transmitter used as shown on the LCD. For
example, press the third from the left Select key to choose
unsupervised. Refer to the installation instructions provided
with the ITI transmitter for additional information. Default is
UN. An asterisk appears to the left of the transmitter type
chosen. Press the
CMD
key to accept selection.
UN = Unused Zone
RF = Supervised Transmitter
UR = Unsupervised Transmitter
When a wireless transmitter reed switch, contact, or button
is in a faulted condition, then the corresponding panel zone
is shorted. When a wireless transmitter tamper is in a faulted
condition, the corresponding panel zone is open. A supervised
transmitter must report to the 738I at least once every 30
hours or that zone is indicated as missing to the DMP panel.
*UN RF UR