DMP Electronics 734N-WIFI, Инструкция по установке и программированию

Страница: 35 / 44

Digital Monitoring Products, Inc. | 734N-WIFI Installation and Programming Guide 31
Electronic Emission
This device complies with CFR47 Part 15 of the FCC rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may
cause undesired operation.
FCC Frequency Interference
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to CFR47 Part 15. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a residential
environment, not withstanding use in commercial, business and industrial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to
radio communications. There is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC INFORMATION