DMP Electronics 734INT, Инструкция по установке и программированию

Страница: 21 / 44

Digital Monitoring Products, Inc. | 734INT Installation and Programming Guide 17
PROGRAM THE PANEL
To access the Programmer menu, reset the panel, enter
6653
(PROG), then press
CMD
.
After completing each of the following steps, press
CMD
to advance to the next option.
Refer to the panel programming guide as needed.
DEVICE SETUP
Advance to DEVICE SETUP , then press any select area or top
row key to enter the setup menu.
Device Number
Set the module’s address. For information about valid
addresses, refer to Table 2.
Device Name
Press any select area or top row key, then enter a name for
the module.
DEVICE SETUP
DEVICE SETUP
DEVICE NO: ‑
DEVICE SETUP
*UNUSED*