1
INSTALL THE 263HINT
Caution:
Ground yourself by touching grounded
metal to discharge static before handling the
panel. Remove all AC and battery power from
the panel before installing or connecting any
modules, cards, or wires to the panel.
XT30INT Series Panel
1.
Insert the SIM card into the SIM card holder
on the 263HINT.
2.
Insert the PCB standoff end with flanges into
the standoff hole in the panel PCB.
3.
Hold the 263HINT at an angle and align the
SMA antenna connector with the antenna
hole in the top of the panel enclosure.
4.
Align the PCB standoff with the standoff
hole in the 263HINT.
5.
Line up the 263HINT card 12-pin connector
onto the Cell Module connector on the panel.
Caution:
Make sure the 263HINT card 12-pin
connector is lined up to avoid damaging the
panel.
6.
Apply even pressure to both sides of the
board and push until the connector is fully
seated on the module.
7.
Attach the included antenna to the SMA
connector. See Figure 2.
DESCRIPTION
65555
SIM
CARD
Figure 1: 263HINT
Cellular Communicator
263HINT INTERNATIONAL
CELLULAR COMMUNICATOR
Installation Guide
The 263HINT Cellular
Communicator provides a fully-
supervised alarm communication
path over the
HSPA+ network.
The 263HINT is installed in the
panel enclosure and powered
by the
panel so no additional enclosure,
power supply, or battery
back-up is needed.
Compatibility
The 263HINT is compatible
with XT30INT Series panels
and XR150INT/XR550INT
Series panels.
What is Included
• One 263HINT Cellular
Communicator
• One 383 Antenna
• One PCB Standoff
• One 381-2 18" Coax
Cable (263HINT/381-2
only)
• One SIM Card
Figure 2: Installing the 263HINT on an XT30INT
