1126R WIRELESS CEILING-MOUNT
360° PIR MOTION DETECTOR
Installation Guide
DESCRIPTION
Figure 1: 1126 Housing
1
The 1126R Wireless Ceiling-Mount
PIR Motion Detector is a 360° PIR
(passive infrared) device designed
for a variety of ceiling-mount
applications.
Its compact design provides a
small sensor that can be remotely
configured. The 1126R has excellent
RFI and noise immunity. The pulse
count feature allows for multiple
trips before an alarm is initiated.
The 1126R features
Disarm/Disable functionality. When
this option is enabled, Zone Tripped
messages disable when the system
is disarmed to allow for extended
transmitter battery life. Supervision,
Tamper, and Low Battery are the
only messages that are sent to the
panel when the system is disarmed.
Compatibility
All DMP 1100 Series Wireless
Receivers and panels.
PROGRAM THE PANEL
OPEN THE 1126R
2
What is Included?
•
One 1126R Wireless Ceiling-Mount
360
°
PIR Motion Detector
•
Two CR123A 3.0V lithium
batteries
When programming the 1126R in the panel, refer to the panel
programming guide as needed.
1. Enter
6653
(PROG) to access the
PROGRAMMER
menu.
2. Navigate to
ZONE INFORMATION
and enter the wireless
ZONE NO:-
and press
CMD
.
3. Enter the
ZONE NAME
and press
CMD
.
4. Select
NT
(night) as the
ZONE TYPE
and press
CMD
.
5. Select the
AREA:
.
6. At the
NEXT ZN?
prompt, select
NO
and press
CMD
.
7. Select
YES
when
WIRELESS?
displays and press
CMD
.
8. Enter the eight-digit
SERIAL#
and press
CMD
.
9. Enter the
SUPVSN TIME
and press
CMD
.
10. At
DISARM DISABLE
, select
NO
or
YES
and press
CMD
.
11. Enter the
PULSE COUNT
and press
CMD
.
12. Select
LOW
or
HIGH
for the
SENSITIVITY
level and press
CMD
.
13. At the
NEXT ZN?
prompt, select
YES
if you are finished
programming. Select
NO
for additional programming
options.
1. Remove the locking screw from the side of the 1126R.
2. Remove the plastic dome by gently squeezing the sides of
the dome and lifting it off the cover.
3. Hold the base and twist the cover counterclockwise until
the 1126R separates. See Figure 2.
Figure 2: Open the 1126R
Plastic Dome
Base
Cover
