2.
The group creator and all group members: Press
for 5 seconds. The LED flashes green quickly.
3.
Only the group creator: Tap
. The LED flashes red and green quickly.
4.
Other members can join the group within 2 minutes.
5.
After each member joins successfully, the LEDs of the joined unit and the creator's unit flash purple.
After grouping is completed, the DMC intercom conference starts automatically.
4.1.1.2 JOINING DMC INTERCOM GROUPS
You can join or rejoin a DMC intercom group created by another skier/snowboarder.
If your DMC group connection is lost, you remain part of the group. Once in range of any other group member, you
automatically reconnect.
If your DMC group splits with some group members remaining in range of each other but not in range of all group
members, you can continue speaking with the members still in range. Once in range of any other group member,
you automatically reconnect.
If you join a new DMC group, you automatically leave your existing DMC group.
To join an existing DMC group:
1.
Confirm your PACKTALK SKI is in DMC intercom mode (LED flashes green slowly).
2.
Both you and the group creator: Press
for 5 seconds. The LED flashes green quickly.
3.
Only the group creator: Tap
. The LED flashes red and green quickly.
The color of the flashing LED indicates whether you have been added to the group:
●
Purple: You have successfully joined the group.
●
Yellow: You cannot join the group because it has already reached the maximum number of members.
●
Red: Failed to join.
4.1.1.3 DELETING DMC INTERCOM GROUPS
If you delete a DMC intercom group, you must rejoin it if you want to connect to it again in the future.
To delete a DMC group:
1.
Confirm your PACKTALK SKI is in DMC intercom mode (LED flashes green slowly).
2.
Press
for 5 seconds. The LED flashes green quickly.
10
Содержание cardo PACKTALK SKI
Страница 1: ......