DLP-USB245M User Manual
Copyright © DLP Design 2002 Page 1 of 15
DLP-USB245M-G USB to FIFO Parallel Interface Module
The DLP-USB245M-G is the 2nd generation, lead free version of DLP Design’s USB adapter. This device adds
extra functionality to it’s DLP-USB1 predecessor with a reduced component count and a new low price.
DLP-USB245M FEATURES
•
Send / Receive Data over USB at up to 1 M Bytes /
sec
•
384 byte FIFO Transmit buffer / 128 byte FIFO
receive buffer for high data throughput
•
Simple interface to CPU or MCU bus
•
No in-depth knowledge of USB required as all USB
•
Protocol is handled automatically within the module
•
FTDI’s Virtual COM port drivers eliminate the need
for USB driver development in most cases.
•
Integrated 3.3v Regulator – No External Regulator
Required
•
Integrated Power-On-Reset circuit
•
Integrated 6MHz – 48Mhz clock multiplier PLL
•
USB Bulk or Isocronous data transfer modes
•
4.4v - 5.25v Single Supply taken directly from the
USB port
•
UHCI / OHCI / EHCI host controller compatible
•
USB 1.1 and USB 2.0 compatible
•
USB VID, PID, Serial Number and Product
Description
•
Strings stored in on-board EEPROM.
•
EEPROM programmable on-board via USB
•
VIRTUAL COM PORT ( VCP ) DRIVERS for
- Windows 98 and Windows 98 SE
- Windows 2000 / ME / XP
- Windows CE **
- MAC OS-8 and OS-9
- MAC OS-X
- Linux 2.40 and greater
•
D2XX ( USB Direct D DLL S/W Interface )
- Windows 98 and Windows 98 SE
- Windows 2000 / ME / XP
[ ** = In planning or under development ]
APPLICATION AREAS
•
Rapid Prototype Development
•
USB ISDN and ADSL Modems
•
High Speed USB PDA Interface
•
USB Interface for Digital Cameras
•
USB Interface for MP3 players
•
High Speed USB Instrumentation
•
USB Smart Card Readers
•
Set Top Box (S.T.B.) PC-USB interface
•
USB Hardware Modems
•
USB Wireless Modems
•
USB Bar Code Readers
