DLoG MPC 6, Руководство пользователя

Страница: 59 / 223

Putting your DLoG MPC 6 in operation
DLoG MPC 6 Manual 43
5.4. Connecting external devices
The DLoG MPC 6 must be disconnected from the power supply:
•
before external devices (e.g., scanner, keyboard) can be connected or
disconnected
•
and before the DLoG MPC 6 can be connected to a network.
All connections and interfaces on the DLoG MPC 6 are located on the underside of the
unit.
Before connecting or disconnecting peripheral devices (exception:
USB devices), the DLoG MPC 6 must be disconnected from the
power supply! If the DLoG MPC 6 is equipped with an optional UPS
battery, only open the device after the power LED has gone out.
Otherwise, this could seriously damage both the DLoG MPC 6 and
the connected devices!
Make sure that external peripheral devices with their own power
supply are switched on at the same time as the DLoG MPC 6 or
after you start the DLoG MPC 6. If this is not possible, please
ensure that the DLoG MPC 6 is adequately protected from power
leakage caused by an external device.