DLoG ITC 7, Руководство пользователя

Страница: 63 / 94

Software applications
DLoG ITC 7 User’s Manual 51
10.3. Environment controller settings
The program MPCCOM has been developed for use in DOS. It does not work under
MS Windows XP or any other MS Windows operating system .
The MPCCOM program is started from DOS.
Using different parameters you can adjust the following settings:
•
Display the current version of your environment controller software as well as
statistical, configuration and control functions (temperature, ignition and so on).
•
Change the shutdown and delay time.
•
Change the reaction time of the power button on the unit’s front panel.
•
Set how the front panel power button is to be interpreted.
•
Set whether the DLoG ITC 7 is to constantly monitor the ignition signal during
operation.
Operation
Launching
MPPCOM.EXE -h
generates the following messages:
MPCCOM -d time0 set power-key time
(time0=time to wait before key press is
recognized in 100ms
valid values [1..255])
MPCCOM -h show this help
MPCCOM -info, -i readout a lot of info stored in EEPROM
MPCCOM -p value set power-key mode
(0=power-key completely disabled
1=wait for the power-key to startup &
use the power-key to switch off the
device
2=ignore the power-key at startup & use
the power-key to switch off the device
3=wait for the power-key to startup &
ignore the power-key on the working
device
MPCCOM -t time1 time2 ...set timer values in sec
(valid values [1..65535])
(time1 = delay time,
time2 = switchoff time)
MPCCOM -kl value ...disable "+" & "-" keys
(0=no, 1=yes)
MPCCOM -kp value ...disable power key
(0=no, 1=yes)