DLG E-BOX-48100R LFP Battery User Manual
21
8.2 Unable to charge
Problem
Troubleshooting Steps
Solution
The battery
cannot be
charged properly
when the battery
is not fully
charged.
1. Confirm that the battery is turned on;
2. Check the power cord. Confirm that the
power cord is correctly connected and the
charging circuit is normal;
3. Check the battery indicator LED to see
if the battery is under “Protection” state. If
so, unplug the battery power cord, find the
cause of the protection, and fix the
problem, then restart the battery;
4. Check if the charging voltage meets the
battery charging requirements. If not,
adjust the power supply voltage to the
normal range.
If the battery still does
not charge properly
after following the
above steps, please
contact the dealer or
DLG.
8.3 Unable to discharge
Problem
Troubleshooting Steps
Solution
The battery
cannot be
discharged
normally.
1. Confirm that the battery is turned on;
2. Check the power cord to ensure that the power
cord is properly connected.
3. Unplug the battery power cord and measure the
battery power output voltage. If the battery voltage
is too low, charge it immediately.
4
．
Check the battery indicator LED to see if the
battery is under “Protection” state. If so, unplug the
battery power cord, find the cause of the protection,
and fix the problem, then restart the battery;
If the battery still
does not discharge
properly after
following the above
steps, please
contact the dealer
or DLG.
