DJPOWER
8
Button
Function
▲
Increases the numeric value of current function
▼
Decreases the numeric value of current function
<ENTER>
Switch between current menu page and Standby Page
5.3
On-device Control Mode & Operation
5.3.1
Programming
•
Refer to the Menu Map to understand the menu options. The menu map shows the main level and a
variable number of programming levels for each option.
•
To go to the desired main level, press <MENU> repeatedly until the option shows on the display. This
will take you to the first programming level for that option.
•
To select an option or value within the current programming level, press
▲
or
▼
until the option
shows on the display. If there is another programming level, you will see that first option, or you will
see the selected value.
•
Press <MENU> repeatedly to switch menu pages.
•
Press <ENTER> to switch between current menu page and Standby Page at any time
5.3.2
Menu Map
Display
Description
Parameter
Range
Preparing
Page
>>>>>>
The machine is heating up.
The machine could only start working
when reach the pre-set target
temperature.
530 - 600
℃
Standby Page
>>>>>>
Finished heating up, ready to work.
Displays current heating system
temperature.
Press <ENTER> to get back to this
page at any time (not DMX mode).
Manual Mode
Pages
Press
▲
or
▼
to switch ON/OFF
Auto Heat-up function.
ON/OFF
The default setting of Auto Heat-up is ON. The Heat-up starts when the
machine is powered on.
LCD will keep showing “Heating Up” until the
heating system reaches pre-set target temperature. When the LCD reads
“Ready to Spark”, the
machine is available for spark effect at the moment.
Press
▲
or
▼
to trigger spark output
manually
ON/OFF
