dji PHANTOM 3 PROFESSIONAL, Руководство пользователя

Страница: 7 / 58

©
2015 DJI. All Rights Reserved.
7
Product Profile
Phantom 3 Advanced User Manual
Preparing the Aircraft
Removing Gimbal Clamp
Remove the gimbal clamp by sliding it to the right (when facing the nose of the aircraft), as shown
below:
Attaching Propellers
Mount the propellers with black nuts on to motors with black axes and spin counter-clockwise to secure.
Mount the propellers with grey nuts on to motors with gray axes and spin clockwise to secure. Be sure all
propellers are securely in place.
Preparing the Remote Controller:
Tilt the mobile device holder to the desired position, then adjust the antennas so they are facing outward.
1. Press the button on the side of the Mobile Device Holder to release the clamp, adjust the clamp to fit
the size of the mobile device.
2. Secure your mobile device in the clamp by pressing down, and connect your mobile device to the
remote controller using a USB cable.
3. Plug one end of the cable into the mobile device, and the other end into the USB port on the back of
the remote controller.
Place all propellers onto the correct motor and tighten by hand to secure its position.
1
3
2