dji PHANTOM 3 PROFESSIONAL, Руководство пользователя

Страница: 17 / 58

©
2015 DJI. All Rights Reserved.
17
Aircraft
Phantom 3 Advanced User Manual
Ensure propellers are attached to its corresponding motors, otherwise the aircraft cannot take off.
Wear gloves when handling propellers.
Hand tighten each of the propellers on the corresponding motors to ensure it is attached firmly.
Detaching the Propellers
Hold the motor still, then spin the propeller in the unlock direction indicated on the propeller itself.
Check that the propellers and motors are installed correctly and firmly before every flight.
Ensure that all propellers are in good condition before each flight. DO NOT use aged, chipped,
or broken propellers.
To avoid injury, STAND CLEAR of and DO NOT touch propellers or motors when they are spinning.
ONLY use original DJI propellers for a better and safer flight experience.
DJI Intelligent Flight Battery
The DJI Intelligent Flight Battery has a capacity of 4480 mAh, voltage of 15.2 V, and smart charge-
discharge functionality. It should only be charged using an appropriate charger that has been approved
by DJI.
Intelligent Flight Battery
Charger
Battery must be fully charged before using it for the first time. Refer to “Charging the Intelligent
Flight Battery” for more information .
Be aware that the output power of the supplied Phantom 3 Advanced charger is 57 W.
DJI Intelligent Flight Battery Functions
1. Battery Level Display: LEDs display the current battery level.
2. Battery Life Display: LEDs display the current battery power cycle.
3. Auto-discharging Function: The battery automatically discharges to below 65% of total power when it is
idle for more than 10 days to prevent swelling. It takes around 2 days to discharge the battery to 65%.
It is normal to feel moderate heat emitting from the battery during the discharge process. Discharge
thresholds can be set in the DJI Pilot app.
4. Balanced Charging: Automatically balances the voltage of each battery cell when charging.
5. Over charge Protection: Charging automatically stops when the battery is fully charged.
6. Temperature Detection: The battery will only charge when the temperature is between 0°C(32°F) and
40°C (104°F).
7. Over Current Protection: Battery stops charging when high amperage (more than 8 A) is detected.
8. Over Discharge Protection: To prevent over-discharge damage, discharging automatically stops when
the battery voltage reaches 12 V.
9. Short Circuit Protection: Automatically cuts the power supply when a short circuit is detected.
10. Battery Cell Damages Protection: DJI Pilot app shows warning message when damaged battery cell