34
Hex Head Valve Stem
HOT oil may cause burns. Allow
engine to cool before draining oil.
CAUTION
CARE AND MAINTENANCE
CHANGING THE ENGINE OIL:
1.
The Dapco oil drain valve is located on the left
side of the engine crankcase.
2.
Place a suitable container under the drain valve
hose.
3.
To drain, turn hex head valve stem counter--
clockwise with 10mm wrench or socket. Open
to full open (approximately 7 turns).
4.
After engine is drained, tighten hex stem.
5.
Change the oil filter.
6.
Fill with oil (see steps below).
NOTE: Refer to engine manufacturers recommendations
for frequency of oil changes.
OIL FILL:
1.
Clean any spilled oil from engine and chassis.
2.
Refill engine with type, and quantity of oil
recommended by the engine manufacturer in
engine literature.
Содержание ZTR CLASSIC
Страница 1: ...ZTR 2003 OPERATOR S MANUAL ZTR CLASSIC...
Страница 42: ...42 NOTES...