background image

 

DIXON LIMITED WARRANTY POLICY -- HYDRO-GEAR MODELS

 

This warranty policy applies to all Hydro-Gear mowers or any 50" model, purchased on or after March 1,1990.

 

WARRANTY: Dixon Warranty term is for a period of one (1) year from date of purchase or 400 hours of use, whichever 
occurs first. Mowers used for residential homeowner applications (used only at owner's primary place of residence) are 
warranted for two (2) years from date of purchase or 400 hours of use, whichever occurs first. DIXON ZTR MOWERS 
ARE WARRANTED AGAINST DEFECTS IN MATERIALS AND WORKMANSHIP AND PROVIDES FOR REPLACEMENT 
OR REPAIR OF PARTS INCLUDING LABOR COSTS. THIS WARRANTY IS SUBJECT TO THE FOLLOWING 
CONDITIONS AND LIMITATIONS:

 

1. 

Warranty applies only to original retail purchaser of new and unused mowers and accessories. 

2. 

All Dixon warranty must be accomplished by authorized Dixon dealers and in accordance with Dixon warranty policy and 
allowances. All warranty claims must be approved by Dixon Industries, Inc. 

3. 

Battery warranty: Limited to 90 days from date of purchase. 

4. 

Accessories Warranty (Grass Catchers, Snow Blades, Tine Rakes, Covers, etc.): Limited to 90 days from date of purchase. 

5. 

Warranty does not apply to damage in transit or incidents of misuse, negligence, accidents, or alteration. The use of parts 
or components other than those supplied by Dixon Industries, Inc. VOIDS ALL WARRANTY. 

6. 

The following items are not covered by this warranty policy: 

 

(a)  Pick up and delivery charges for transportation of mower to and from an Authorized Dixon Dealer's place of business. 
(b)  Routine maintenance or adjustments. 
(c)  Belts / chains / sprockets / cutting blades. 
(d)  Engines -- All engines used on Dixon ZTR mowers are warranted by each individual engine manufacturer. 
(e)  Any costs or expense of providing substitute equipment while repair work is being performed on a warranted mower. 

7. 

There is no other express warranty. Implied warranties, including those of merchantability and fitness for a particular 
purpose, are limited to the same duration of the express warranty, and to the extent permitted by law any and all implied 
warranties are excluded. Liabilities for consequential damages under any and all warranties are excluded.

 

 

 

Page 4

 

Содержание ZTR 5421












































Отзывы: