Dixon SPEEDZTR 42SE, Руководство оператора

Страница: 20 / 60

20
ContRols
8058-134
Choke control
Ignition Switch
The ignition switch is placed on the control panel and
is used to start and stop the engine.
On models equipped with headlights, turn the key
clockwise to ACCeSSORy for headlight use
Choke Control
The choke control is used for cold starts in order to
provide the engine with a richer fuel mixture.
for cold starts on models with separate choke, the
control on should be pulled out. Push the choke in
once the engine starts.
8058-134
Ignition switch
8058-134
Hour meter
Hour Meter
The hour meter displays the total operating time with
the blade activated, eliminating hours being added if
the key was accidentally left on.
To view the operating hours, turn the key to the ON
position and engage the blade switch. The clutch will
engage and the hours should be shown on the meter.
The display on the hour meter will turn on the oil can
icon after every fifty hours of use and will stay on for
two hours or until the meter is manually reset.
To manually reset the timer, turn the ignition key to the
RUN position and then engage and disengage the
blade switch five times at one second intervals.