background image

DIXON

-47

MAINTENANCE

Blade replacement

Remove blade bolt by turning counte rclockwise.

1. 

Install new or resharpened blade with stamped 

2. 

“GRASS SIDE” facing towards ground/grass 
(down) or “THIS SIDE UP” facing deck and cutter 
housing.
Install and tighten blade bolt securely.

3. 

Torque blade bolt to 90 ft/lbs (122 Nm).

4. 

IMPORTANT INFORMATION

Special blade bolt is heat treated.

Replace with a Dixon bolt if required.

Do not use lower grade hardware than 
specified.

8053-027

1. Blade
2. Blade bolt (special)
3. Cutter housing

Blade attachment

1

2

3

Cutting Blades

In order to attain the best mowing effect, it is important 
that the blades are well sharpened and not damaged.
Bent or cracked blades or blades with large nicks 
should be replaced. 

IMPORTANT INFORMATION

The sharpening of blades should be carried 
out by an authorized service workshop.

WARNING!

Blades are sharp. Protect your hands 
with gloves and/or wrap blades with 
a heavy cloth when handling.

8011-604-1

Check the blades

Damaged blades should be replaced when hitting 
obstacles that result in a breakdown. Let the service 
workshop decide whether the blade can be repaired/
ground or must be replaced.
Balance the blades after sharpening.
Check the blade mounts.

1

3

2

Содержание SPEEDZTR 36/965882201 SPEEDZTR 44 / 965882301 SPEEDZTR 48 / 965882401













































































Отзывы: