background image

SAFETY

9

Safety Instructions

These instructions are for your safety. Read them 
carefully.

General Operation

•  Read, understand, and follow all instructions on 

the machine and in the manual before starting.

•  It is recommended that someone be aware that 

you are mowing and can provide help in case of 
injury or accident.

•  Do not put hands or feet near rotating parts or 

under the machine. Keep clear of the discharge 
opening at all times.

•  Only allow responsible adults, who are familiar 

with the instructions, to operate the machine.

•  Clear the area of objects such as rocks, toys, wire, 

etc., which could be picked up and thrown by the 
blades.

•  Be sure the area is clear of bystanders before 

operating. Stop machine if anyone enters the 
area.

•  Never carry passengers. The machine is only 

intended for use by one person.

•  Do not mow in reverse unless absolutely 

necessary. Always look down and behind before 
and while backing.

•  Never direct discharged material toward anyone. 

Avoid discharging material against a wall or 
obstruction. Material may ricochet back toward 
the operator. Stop the blades when crossing 
gravel surfaces.

•  Do not operate machine without the entire grass 

catcher, discharge guard, or other safety devices 
in place and working

•  Slow down before turning.
•  Never leave a running machine unattended. 

Always turn off blades, set parking brake, stop 
engine, and remove keys before dismounting.

8011-512

Read the operator’s manual before starting the machine

8011-513

Clear the area of objects before mowing

WARNING!

THIS CUTTING MACHINE IS CAPABLE 
OF AMPUTATING HANDS AND FEET 
AND THROWING OBJECTS. FAILURE 
TO OBSERVE THE FOLLOWING SAFETY 
INSTRUCTIONS COULD RESULT IN 
SERIOUS INJURY OR DEATH.

WARNING!

This symbol means that important safety 
instructions need to be emphasized. It 
concerns your safety.

Содержание 966690603





























































Отзывы: