Dixon 966038601 Скачать руководство пользователя страница 43

Страница: 43 / 72

maIntenanCe

Deck Belt Installation

NoTE: for ease in installing the deck belt, refer to
the routing decal on the top of the deck.
Wrap the deck belt around the electric clutch

pulley that is located on the engine shaft.
route the belt forward and up onto the deck.

Place belt around spring loaded idler pulley.

Wrap the belt around the stationary idler pulley

and around the mandrel housings.
Push inward on the idler arm and carefully route

belt over stationary idler pulley. once belt is
properly routed, slowly release idler arm to tension
belt.
double check belt routing to make sure it matches

the routing decal, and the belt does not have any
twist. Correct as needed.
replace belt shields on both mandrel housings

and secure with fasteners.

8011-764

Clutch pulley

Deck belt

Belt routing, deck belt

Pump Belt
Replacing pump belt

Park the mower on a level surface. Engage the
parking brake.

Belt removal

remove the deck belt (see deck Belt removal in

this section of the manual).
Create slack in the belt by removing the spring on

the pump idler arm.
The belt should now be able to be removed from

the engine pulley and pump pulleys.

Belt installation

Wrap the belt around the pulley

route the belt around the inside of the idler

pulley.
Wrap the belt around the engine pulley.

reattach the spring on the pump idler arm.

reinstall the deck belt. (see deck Belt

Installation in this section of the manual).

8054-002

Electric clutch

Idler spring

Clutch stop

Pump belt removal

Содержание 966038601








































































Результаты поиска

Содержание 966038601

Отзывы:

Похожие инструкции для 966038601

Бренды по названию

Популярные бренды

Dixon 966038601, Руководство оператора

Результаты поиска

Содержание 966038601

Отзывы:

Похожие инструкции для 966038601

Бренды по названию

Популярные бренды