Page 14
CONTROLS
CAUTION
Engage parking brake before
TO SET PARKING BRAKE:
The hand operated parking brake is located on the right
fender.
To engage brake, pull lever up(to the rear).
To release brake, move lever forward (down).
NOTE:
Always set parking brake before dismounting.
Release parking brake before moving mower.
TRANSMISSION DRIVE SYSTEM:
Allows the mower to turn on its own axis
"Zero Turning Radius"
Each lever controls one side of the mower.
NOTE:
The pressure required to operate the mower is very
light.
starting engine.
PARKING BRAKE:
The parking brake is designed to hold the mower from moving
and is not intended for use in stopping the mower while it is
in motion. The engine will stop if the parking brake is engaged
while the control levers are in the drive position.
Содержание 1999 ZTR 4515B
Страница 1: ...4500 SERIES 1999 Operator s Manual...
