54
Chapter 2: Camera Configuration
Event - Relay Handler
Relay Handler Configurations
This section configures the event trigger options for devices connected to
the DI/DO of the camera.
Modes
The available options are
Monostable
, or
Bistable
.
Trigger Alarm Detection:
When a signal is detected from Alarm in,
the Alarm out will be triggered.
Trigger Motion Detection:
When a motion detection event is
detected, the Alarm out will be triggered.
Trigger Tampering Detection:
When a tampering alarm event is
detected, the Alarm out will be triggered.
Trigger Object Detection:
When an object detection event is
detected, the Alarm out will be triggered.
Trigger Audio Detection:
When an audio detection event is detected,
the Alarm out will be triggered.
Types
The options are
N.O.
and
N.C
.
Off Times
Configure the seconds from 0 to 30 seconds.
