manualshive.com logo in svg

Ditch Witch JT5, Руководство оператора

Поделиться
Скачать
Ditch Witch JT5 Скачать руководство пользователя страница 48

Manual

Prepare - 47

Classify Jobsite

CMW

®

Apply Precautions

Once classified, precautions appropriate for jobsite must be taken.

Electric Jobsite Precautions

In addition to using a directional drilling system with an electric strike system, use one or both of these 
methods.

•

Expose line by careful hand digging or soft excavation. Use beacon to track bore path.

•

Have service shut down while work is in progress. Have electric company test lines before returning 
them to service.

Natural Gas Jobsite Precautions

In addition to using a directional drilling system and positioning equipment upwind from gas lines, use one 
or both of these methods.

•

Expose lines by careful hand digging or soft excavation. Use beacon to track bore path. Have 
someone observe clearance between drill head and backreamer when crossing a line.

•

Have gas shut off while work is in progress. Have gas company test lines before returning them to 
service.

Electric shock will cause death or serious injury. Stay 

away.  

Fire or explosion possible. Fumes could ignite and cause 

burns. No smoking, no flame, no spark.  

275-419 (2P)

Explosion possible. Serious injury or equipment damage could occur. 

Follow directions carefully.

Содержание JT5




























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды