Ditch Witch 053-2962 страница 13 Скачать руководство пользователя | Manualshive

Страница: 13 / 85

background image

Safety Awareness - 12

SK600 Operator’s Manual

Guidelines

Guidelines

Follow these guidelines before operating any jobsite equipment:

• Complete proper training.
• Read and understand operator’s manual before using equipment.
• Wear personal protective equipment. See “Prepare Operator” in “Prepare” chapter.
• Mark proposed path with white paint and have underground utilities located before working. In the

US or Canada, call 811 (US) or 888-258-0808 (US and Canada). Also contact any local utilities that do

not participate in the One-Call service. In countries that do not have a One-Call service, contact all

local utility companies to have underground utilities located.

• Classify jobsite based on its hazards and use correct tools and machinery, safety equipment, and work

methods for jobsite.

• Mark jobsite clearly and keep spectators away.
• Review jobsite hazards, safety and emergency procedures, and individual responsibilities with all

personnel before work begins. Safety videos are available from your Ditch Witch® dealer or at

www.ditchwitch.com/safe. Safety Data Sheets (SDS) are available at www.ditchwitch.com/support.

• Fully inspect equipment before operating. Repair or replace any worn or damaged parts. Replace

missing or damaged safety shields and safety alert signs. Contact your Ditch Witch dealer for

assistance.

• Follow instructions on all safety alert signs on machine.
• Use equipment carefully per the instructions in this manual. Stop operation and investigate anything

that does not look or feel right.

• Do not operate machine where flammable gas may be present.
• Only operate equipment in well ventilated areas.
• Always tie down equipment and properly stow accessories, even if traveling short distances.
• Contact your Ditch Witch dealer if you have any questions about operation, maintenance, or

equipment use.

Misuse of machine can cause death or serious injury.

Read and understand operator’s manual and all other safety instructions

before use. Know how to use all controls.

Raised component. Crushing can cause death or serious

injury. Stay away. Use correct equipment and procedures.

«
...
11
12
13
14
15
...
»

Содержание 053-2962






















































































Отзывы:

Нет отзывов

Похожие инструкции для 053-2962

Бренд: Case Страницы: 41

Бренд: Land Pride Страницы: 34

Бренд: Takeuchi Страницы: 215

Solar Gard Computer Cut

Бренд: SAINT-GOBAIN Страницы: 5

Бренд: jcb Страницы: 242

Бренд: Komatsu Страницы: 41

Бренд: Komatsu Страницы: 284

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды