REV. 09/20 1 of 2
ASSEMBLY INSTRUCTIONS
Rolling Medical Tablet Kiosk with Handle
PARTS:
Assemble the wire basket (IPDMEDBS, sold separately)
Assemble the base with the pole using 4 included screws and tighten them to secure the stand.
Attach the tablet enclosure to the top of the stand and fix it with screws and nuts.
Before assembling each accessory, insert needed T-slot nuts into the
T-slot on the side of the upright pole from the bottom.
Slide the nuts up to the desired height and hold them when assembling.
Assemble the laptop tray (IPDMEDTR, sold separately)
