disperator 500A-MC EXCELLENT Series Скачать руководство пользователя страница 9

User manual in Original

Doc. ref: 500A_MC_am_en_210602
DISPERATOR AB

 

    

Tel: 08-724 0160   

 

E-mail: [email protected]

Mälarvägen 9, 141 71 Segeltorp   

 

 

 

 

 

Web page: www.disperator.se

9 / 44

8 / 44

2.   Company Profile

Disperator’s business idea is to provide innovative and adaptive equipment for kitchens on land as well 

as galleys at sea, and for the food processing industry, which enables efficient collection of communited 

food leftovers for anaerobic digestion or composting in subsequent stages, which is of benefit to society. 

 

 With over 70 years of experience in the development and production of such equipment, our devotion 

to this has resulted in the unique operational reliability required for the extreme conditions prevailing in 

the marine industry.  Furthermore, our innovativeness has provided commercial kitchens on land with an 

alternative approach to handle food waste separation at source, complying with modern demands and 

being economically affordable. 

Our product assortment is unique! Disperator can as the only manufacturer of such equipment offer 

all types of installation possibilities needed in a kitchen. Our basic range of five different series of 

water-based food waste disposers, consisting of three to six different sizes in each serie, which may be 

combined with as many as 13 different mounting assemblies. Furthermore, the advantage of the basic 

model’s design is that the waste disposers may easily be integrated into other kitchen manufacturer’s 

mounting assembly or furniture. Thereby, each workplace in a kithen or galley can be designed to its 

specific requirements regarding function, ergonomics and economy. To all this there is also the different 

series of water-saving processor technology for collection and storage of grinded food waste in a tank, as 

well as disposers that grinds food waste without any flushing water at all.

Содержание 500A-MC EXCELLENT Series













































Отзывы: