Ge
tt
ing St
ar
te
d
1
1-
7
Charging Battery
Battery must be inserted in handset to
charge it.
.
Use specified AC Charger
ZTDAA1
(sold
separately) only. In this guide, ZTDAA1 is
referred to as "AC Charger."
.
Handset and AC Charger may warm during
charging.
1
Open Port Cover as shown
2
Connect AC Charger
.
With arrows up, insert connector until
it clicks.
3
Extend blades
4
Plug AC Charger into AC
outlet
.
Small Light illuminates red while
charging.
.
Small Light goes out when battery is
full.
5
Unplug AC Charger
.
Pull AC Charger straight out.
6
Disconnect handset
.
Squeeze release tabs to remove
connector.
7
Fold back blades and
replace Port Cover
Charging Battery
Important AC Charger Usage Notes
.
Fold back blades after charging.
.
Do not pull, bend or twist the cord.
AC 100
V
O
u
tlet
Blades
AC Charger
Port Co
v
er
Release
Ta
b
s
Charger Connector
Arro
w
s
External
De
v
ice Port
Small Light
When Small Light Flashes
.
Battery is unchargeable; may be defective
or simply at the end of its life; replace it.
USB Charge
.
Connect handset (with power on) to PC
via USB Cable to charge battery.
Advanced
1
)