Dish TV T1000n-VM, Руководство пользователя

Страница: 18 / 22

FREQUENTLY ASKED QUESTIONS:
18
Dish TV T1000n-VM Terrestrial Receiver - Requires a connection to a UHF Aerial.
Q. There is a message on my TV saying “No Signal”
A. Low or No signal can cause this message to appear, it could be either or all of the
following:
• Faulty Set-Up i.e. Aerial.
• Aerial cable not plugged into receiver.
• UHF Aerial not pointing to correct transmitter.
• Cable may have poor connections.
• Split into too many rooms.
• Cables are too old, worn or damaged.
• Cable not connected to UHF Aerial.
Q. How do I set the time?
A. Your unit will automatically update the time from the broadcast.
Q. I get pixelation on some channels
A. We recommend you consult a local satellite installer, as this is most likely signal related.
Q. What is the Default PIN?
A. The Default PIN is 0000.
Q. Dolby Digital, I’m not getting it.
Dolby Digital only works with HD channels with programmes that can only output in that
format. Refer to your guide or contact the broadcaster directly regarding shows that have
Dolby Digital.
If you are getting unusual issues with your unit such as freezing on menus please
• Factory Reset the receiver.
• Check that software is up to date.
Check the Troubleshooting on Page 19 for additional help, otherwise you can contact Dish
TV. See Support Information on Page 20 .