Quick Start Guide
S7070
S7070
Thank you for choosing Dish TV for your Freeview satellite receiver.
This guide will provide you with simple instructions for connecting and operating
your Dish TV unit.
Further help can be found at www.dishtv.co.nz
Before you start
Please check that your Dish TV box contains all of the following components.
Inserting the batteries.
●
Open the battery cover.
●
Insert 2 AAA batteries (provided) by matching the
+
and
-
marks on the batteries
with the
+
and
-
marks in the battery compartment.
●
Replace the battery door.
Note
: The Dish TV S7070 is a Freeview satellite receiver. It requires a working satellite
dish correctly aligned to the satellite Optus D1.
It does not use a TV aerial.
If you receive any warning on screen or have problems tuning in channels, reset
your Dish TV receiver.
On the back panel of the receiver is a power switch, turn this off for 15 sec and
then turn it back on. Exit the current screen and enter the Menu.
Choose installation and then Factory Default. Enter 0000 for the password and
Yes to reset.
AAA
AAA
2 x AAA Batteries
power
numeric
TV/radio
page up/down
OK
Menu
ESG
Teletext
favourite
timer
channel (+/-)
mute
recall
navigation
exit
colour
text
MHEG EPG
subtitle
multiaudio
volume (+/-)
Dish TV Remote Control
Dish TV S7070
User Manual
The Dish TV remote control
Composite Video Cable
