118866
21
O
THER
R
EMOTE
C
ONTROL
I
NSTRUCTIONS
H
OW TO
S
CAN FOR
TV C
ODES
If the code for your TV is not in the TV Codes tables
starting on page 32, complete the following instructions to
scan for your TV’s code.
1. Make sure your TV is on.
2. Hold
until
lights turn on (it takes
about five seconds).
3. Release
.
light flashes.
4. Press
.
light stays on.
5. Press
or
until the TV turns OFF. You
will have to do this repeatedly to scan through all
codes.
Note
: If
flashes eight times, you have tried
every code in the remote control.
6. Press the
MUTE
to finish programming the remote
control. The
light will flash three times.
7. Turn your TV back on by pressing
again and
try the other buttons below to make sure they work.
•
Press the
0
through
9
buttons to change channels
on your TV.
•
Press
and
to change channels on
your TV.
•
Press
to change the TV volume.
If the buttons work, you have found the correct
code for your TV and you may want to go to page 8
to set up
. If the buttons do not work, go back to
step 2 to find another code.
SAT
TV
TV
TV
TV
TV
TV
TV
VOL
VOL