DISCOVER 950-0040, Инструкция по установке и эксплуатации

Страница: 6 / 14

6
4.1 Reset Operation
To reset LYNK LITE, remove and reconnect power to the device.
NOTICE
HAZARD OF EQUIPMENT DAMAGE
Cycling power to LYNK II will cause communications with other devices to be
interrupted. Cycling power will not alter previous settings.
Failure to follow these instructions may cause damage to the equipment.
4.2 LED Indicators
Figure 2: LINK LITE LED Indicators
Data LEDs Indication
LYNK Port LED Flashes when a new battery is detected on the LYNK Port.
Solid when there is active communication on the LYNK Port.
CAN Out LED This indicates that a CAN heartbeat message has been
received in the proper protocol within the past 5 seconds.