DISCOVER 950-0040, Инструкция по установке и эксплуатации

Страница: 12 / 14

12
NOTE
A powered USB hub may be required.
Open LYNK ACCESS. LYNK LITE configurations and settings can be found by
selecting the LYNK tab.
7.0 Configuring the CAN Communication with LYNK ACCESS
Connect the LYNK and open LYNK ACCESS. Ensure that you only have one
LYNK device connected to the Computer.
Open LYNK ACCESS and select the LYNK tab. Select the blue gear icon in the
upper right area of the CAN Settings tile.
Select one of the pre-configured Closed-Loop Protocols. To complete the
configuration enable or disable termination for the CAN Out port as required.
Click SAVE to confirm the configuration.
Refer to the appropriate application note for instructions on setting the
external device to communicate correctly with LYNK LITE. Up-to-date
application notes for various external devices are available from the Discover
Battery website.